LED Status Test Information for BoostMAX

Forum Index Forums BoostMAX LED Status Test Information for BoostMAX

Tagged: 

This topic contains 0 replies, has 1 voice, and was last updated by  JMS Chip 4 years, 2 months ago.

  • Author
    Posts
  • #136

    JMS Chip
    Keymaster

    Below is a basic description of what the diagnostic LED lights represent for JMS BoostMAX systems.

    Diagnostic LEDs on the Black Box:

    • Green LED light = Solid LED, device is powered ON and working
    • Yellow LED = Indicates Voltage from the Pedal
    • Blue LED = Indicates Adjustment Knob Setting

    With Knob Installed and set @ Zero
    The Yellow LED results show that the Pedal Input is GOOD
    The Blue LED results show that the Knob Output is at Zero and GOOD
    Pedal stock position – Green solid • Yellow solid • Blue solid
    Pedal 50% position – Green solid • Yellow blinks slow • Blue solid
    Pedal 100% position – Green solid • Yellow blinks fast • Blue solid

    With Knob Installed and set @ 50%
    The Yellow LED results show that the Pedal Input is GOOD
    The Blue LED results show that the Knob Output at 50% is GOOD
    Pedal stock position – Green solid • Yellow solid • Blue solid
    Pedal 50% position – Green solid • Yellow blinks slow • Blue blinks slow
    Pedal 100% position – Green solid • Yellow blinks fast • Blue blinks slow

    With Knob Installed and set @ 100%
    The Yellow LED results show that the Pedal Input is GOOD
    The Blue LED results show that the Knob Output at 100% is GOOD
    Pedal stock position – Green solid • Yellow solid • Blue solid
    Pedal 50% position – Green solid • Yellow blinks slow • Blue blinks fast
    Pedal 100% position – Green solid • Yellow blinks fast • Blue blinks fast

You must be logged in to reply to this topic.