Correction on FuelMAX V2 Boost Activated Instruction Manuals

Forum Index Forums PowerMAX Correction on FuelMAX V2 Boost Activated Instruction Manuals

This topic contains 0 replies, has 1 voice, and was last updated by  JMS Chip 4 years, 1 month ago.

  • Author
    Posts
  • #163

    JMS Chip
    Keymaster

    This correction effects FuelMAX V2 instruction manuals for boost activated devices – PM-2009 and PM-2029 page 8, PM-2009-PPM11 and PM-2009-PPS11 page 6.

    Below is the accurate wording for Step 11:

    Step 11 – Adjust the Boost voltage and Range
    • Set the Boosted Output Voltage & options via the front panel
    configuration switches and knobs.
    • Set the Ignition Key to the “ON” position • (Power ON =
    Green LED is ON [illuminated ON])
    • Set Dip Switch 1 – “ON” (Switch 1 “ON” – Enables the configuration
    of the front panel switches and knobs)
    • Set Dip Switch 2 – Choose the voltage output range. OFF
    = 18v, ON = 22v
    • Adjust Voltage Output – 0 = 14.5v, 100% = Maximum for the
    selected voltage range.

You must be logged in to reply to this topic.